Garmin Zumo XT & XT2 Locking Security GPS Mount by MotoPumps®
Garmin Zumo XT & XT2 Locking Security GPS Mount by MotoPumps®
** In Stock and Shipping Immediately**
$109.99 MSRP ($119.99 for the 28mm)
MotoPumps® Locking Security Mount for the Garmin Zumo XT, XT2 and Garmin Tread 5.5 GPS is here. This mount combines two of our extremely popular products, the Zumo XT Security Lock and our AMPS pattern GPS mount in one unit. ***Note - If you have purchased the Group Ride Radio add on module, the antenna interferes with the locking mechanism***
(If you already have a full GPS mount and just need the Garmin Zumo XT Security Lock — go here: https://www.motopumps.com/shop/zumo-xt-security-lock )
The lock works by blocking the release of the GPS from the cradle and mount. Our proprietary locking pin and key secures your GPS to the bike, preventing casual theft of your expensive Garmin Zumo XT/2 when you leave your bike unattended.
We developed the GPS mount after being frustrated with the heavy, fragile, overly large, complex and expensive offerings. Machined from 6061 billet aluminum and DuPont Delrin, the mount is strong, stable, light and 100% weather/corrosion resistant. We created the Garmin Zumo XT Security Lock because Garmin didn’t provide any anti-theft protection into the otherwise stellar Zumo XT GPS. When both of those products were flying out the doors of our shop, we decided to combine the two and offer them at a lower price than the individual pieces. We make them right here in Beautiful Upstate NY.
Mounting hardware is stainless steel and designed for the Zumo XT powered cradle that came with your Garmin Zumo XT GPS. Choose the clamp diameter that fits the crossbar of your bike. They are available in 12mm, 14mm, 16mm and 22mm. If you don’t know the diameter of the cross bar on your bike and don’t have a caliper to measure the diameter, break out your open ended wrenches and see which one matches the diameter of the bar. We also have a list of known fitments below.
Installation is a snap! Your kit consists of the combination AMPS plate and security lock, 12, 14, 16 or 22mm clamps, 304 stainless proprietary stainless security pin, two 304 stainless matching security keys, stainless M4 mounting hardware and instructions. The mounting plate has both horizontal and vertical AMPS pattern and clamp holes so you can go portrait or landscape to suit your mounting needs. The 12mm and 14mm clamps are height adjustable in 3 positions, the 16mm and 22mm clamps height adjustable in two positions.
Note: GPS Cradle not included. The pictured GPS cradle is for a Garmin Zumo XT / Tread 5.5 that came with the GPS unit when purchased new.
Known Fitments:
12mm (1/2”)
Honda Africa Twin 2016-19, Camel ADV Brace Kit for AT, Honda CB500x 2019-20, BMW R1200 GS / A ‘14-18, All BMW R1250 GS and GSA and ALL R1300 GS and GSA, All Yamaha Tenere 700, 2014+ Yamaha Super Tenere XTZ1200, Aprilia Tuareg 660, ‘23 Kawasaki KLE650 Versys, ‘23 Suzuki VStrom 800DE.
14mm
2022+ Kawasaki KLR650 (all models)
16mm
BMW R1200 GSA ‘05-’13
Benelli TRK 502X 2021
2014-2017 BMW F800 GS Adventure
22mm 7/8”
All VStrom 1050 models.
Honda CFR250L Rally
Honda CRF300L Rally
All 7/8” handlebars
28mm 1 1/8" handlebars or "Fat Bars"
Fits all bars of that diameter at the wide section. When in doubt, measure!
(Pro Tip - If you don’t have a caliper to measure the mounting point on your bike, get an open ended wrench out and see what fits over the mounting point) Still not sure? Send us a message using the contact link on the site.)
** In Stock and Shipping Immediately**
Free US shipping on all orders
*** For those mounting on a modern BMW GS or GSA, use this plug from BMW for plug and play wiring with the Garmin Zumo XT: For plug and play wiring, this is the part you want from BMW to power the GPS: Part# |Description | Each | Total
-------------------|----------------------------------------|------------|---------------------
83300413585 |REPAIR PLUG, 3-PIN - NO. 611656 | $16.58| $16.58
The leads are numbered, 1, 2, 3. #1 is ground, #3 is power, #2 is not used.
***Select required clamp size for your application or extra security pins or keys***